Products

The Melpool programme consists of components which are carefully tuned to each other.

Read more
Read less

Melpool 70/G

Read more

Quickly dissolving non-stabilised sanitiser in granular form for shock treatment and continuous disinfection in soft and medium hard water.
Use biocides safely. Always read the label and product information before use.

Continuous disinfection (stabilised water): 20-30 g per 10 m³ of water every 1 or 2 days.

Non-stabilised water: 30-50 g per 10 m³ of water every day (divided into 2 equal doses in the morning and evening).

Shock treatment/ presence of algae: 50-80 g per 10 m³ of water. After a shock treatment the pool should not be used for several hours.
Maintain the chlorine level between 1 and 2 ppm in stabilised water, and between 0,5 and 1 ppm in unstabilised water. 16 g of product in 10 m³ of water will increase the chlorine level by 1 ppm (mg/l)

Melpool 70/20

Read more

Non-stabilised sanitiser tablets of 20 g for continuous disinfection in soft and medium hard water.
Use biocides safely. Always read the label and product information before use.

Continuous disinfection (stabilised water): 1-2 tablets per 10 m³ of water every 1 or 2 days.

Non-stabilised water: 2-3 tablets per 10 m³ of water every day (divided into 2 equal doses in the morning and evening).

Shock treatment/ presence of algae: 3-4 tablets per 10 m³ of water. After a shock treatment the pool should not be used for several hours.
Maintain the chlorine level between 1 and 2 ppm in stabilised water, and between 0,5 and 1 ppm in unstabilised water. 1 Tablet of product in 10 m³ of water will increase the chlorine level by 1,4 ppm (mg/l).

Melpool 63/G

Read more

Quickly dissolving stabilised sanitiser in granular form for shock treatment and continuous disinfection in hard and soft water.
Use biocides safely. Always read the label and product information before use.

Shock treatment/ presence of algae: 50-80 g per 10 m³.

Continuous disinfection: 20-30 g per 10 m³ every one or two days.
Maintain the chlorine level between 1 and 2 mg/l (ppm). 17 g of product in 10 m³ of water will increase the chlorine level by 1 mg/l (ppm).

Melpool 55/G

Read more

For shock treatment and continuous disinfection. Suitable for use in hard and soft water.
Use biocides safely. Always read the label and product information before use.

18 g increases the chlorine content of 10m³ by about 1 ppm. Maintain free chlorine level between 2 - 3 ppm.

Melpool 50/20

Read more

Quickly dissolving effervescent stabilised sanitiser tablets of 20 g for shock treatment and continuous disinfection.
Use biocides safely. Always read the label and product information before use.

At the beginning of the season or in case of shock treatment or visible algae: 3-5 tablets per 10 m³ of water (in addition to the dosage for continuous treatment).
After a shock treatment make sure the chlorine level is under 5 ppm before using the  swimming pool again.

1 Tablet in 10 m³ of water will increase the chlorine level by 1 mg/l (ppm).

Melpool 90/G

Read more

Slowly dissolving stabilised sanitiser in granular form, recommended for use as local algaecide.
Use biocides safely. Always read the label and productinformation before use.

First brush the affected areas thoroughly. Than pour some 20-40 g of the slow dissolving granules onto the affected area. The next day brush again. Repeat this treatment if necessary.
Warning: dependent on the pool coating discolouration may occur.

Melpool 90/20

Read more

Slowly dissolving stabilised sanitiser in tablets of 20 g.
Use biocides safely. Always read the label and product information before use.

10 tablets for 30-35 m³ of pool water every 3-5 days. Dosage may vary widely (sunlight, bathing-load etc.).
Maintain the chlorine level between 2 and 5 mg/l (ppm).

Melpool 90/200

Read more

Slowly dissolving stabilised sanitiser in tablets of 200 g.
Use biocides safely. Always read the label and product information before use.

One tablet for 30-35m³ of pool water every 5-8 days. Dosage may vary widely (sunlight, bathing-load etc.).
Maintain the chlorine level between 2 and 5 mg/l (ppm).

Melpool 90/500

Read more

Slowly dissolving stabilised sanitiser in tablets of 500 g.
Use biocides safely. Always read the label and product information before use.

One tablet for 30-40m³ of pool water every 15-20 days. Dosage may vary widely (sunlight, bathing-load etc.).
Maintain the chlorine level between 2 and 5 mg/l (ppm).

Melpool MF/200

Read more

Organic chlorine tablets (200 g) with 4 functions: disinfection, chlorine stabilisation, algaecidal and flocculent. 
Use biocides safely. Always read the label and product information before use.

It should be added via the skimmer or suitable floating device. Do not throw the tablet directly into the swimming pool. 

Dosage: 1 tablet for 30-35 m³ of pool water every 3-5 days. Dosage may vary widely (sunlight, bathing-load etc.). Maintain the chlorine level between 2 and 5 ppm. Generally, the pH should be maintained between 7.2 and 7.6.

Melpool BR/20

Read more

Bromine tablets for use in whirlpools and indoor pools. 
Use biocides safely. Always read the label and product information before use.

Maintain free bromine level between 3 - 4 ppm.

Melpool OXY

Read more

Non-chlorine shock treatment to remove organic dirt.
Use biocides safely. Always read the label and product information before use.

Once a week; 200 g per 10m³.

Melpool pH-

Read more

To decrease the pH of pool water.

80 g (50 ml) of this product in 10 m³ of water will decrease the pH by 0,1.

Melpool pH+

Read more

To increase the pH of pool water.

80 g (80 ml) of this product in 10 m³ of water will increase the pH by 0,1.
Do not add more than 300 g/10 m³ of water during each treatment.

Melpool TA+

Read more

To increase the total alkalinity of the pool water.

150 g of this product into 10 m³ of water will increase the TA by 10 ppm.
Do not add more than 300 g/10 m³ of water during each treatment.

Melpool PAC

Read more

Liquid flocculant, it coagulates suspended particles, which are too small for the filter. The flocs formed are big enough to be retained by the filter.

Once or several times a week 10 ml for 10 m³ of water. In case of high turbidity the dosage may be doubled or tripled.
An excessive dose should be avoided, since this may have an adverse effect

Melpool CAP

Read more

Liquid flocculant, it coagulates suspended particles, which are too small for the filter. The flocs formed are big enough to be retained by the filter.

Once or several times a week 10 ml for 10 m³ of water. In case of high turbidity the dosage may be doubled or tripled.
An excessive dose should be avoided, since this may have an adverse effect.

Supercubes

Read more

Gel cubes for continuous flocculation. Highly suitable for pools with underwater lights. The water really becomes crystal-clear.

Place Super Cube in the skimmer. If many leaves are blown into the pool, it is recommendable to put the Super Cube into a laundry net and to place the net into the skimmer. Otherwise, the leaves will stick to the Super Cube. 1 Super Cube per app. 50 m3 will make sure of a continuous flocculation for 6-8 weeks.

Solufloc

Read more

Flocculation cartouches for contamination that cannot be removed by a filtration system.

1 cartouche for 20-40 m3 of water, depending on the degree of contamination.

Melpool QAC

Read more

Non-foaming algaecide for whirlpools and swimming pools.
Use biocides safely. Always read the label and product information before use.

To prevent algae:
First treatment of 50 ml for 10 m³ of pool water.
After that 30 ml for 10 m³ of water every week for indoor pools and 50 ml for 10 m³ of water for outdoor pools.
In case of visible algae (greenish water :
First carry out a shock treatment with chlorine. After that, dose 250 ml of the product per 10 m³ of water. After treatment the water should circulate for 1 hour, then the pump should be stopped for 2 hours.

Never overdose!

Melpool QAC/S

Read more

Concentrated algaecide to prevent algae growth and to get rid of existing algae.
Use biocides safely. Always read the label and product information before use.

To prevent algae: Initial treatment of 50 ml for 10 m³ of water. After that 20-30 ml for 10 m³ of water every week.
In case of visible algae (greenish water):
First carry out a shock treatment with chlorine. After that, dose 100-150 ml of the product for 10 m³ of water.

Never overdose!

Melpool CAL

Read more

Stain and scale inhibitor.

For preventive maintenance of 10 m³ of water:
water hardness 350-500 ppm (25-35 English degrees): 100 ml every 3 months.
water hardness 500-750 ppm (35-53 English degrees): 200 ml every 2 months.
water hardness > 750 ppm (53 English degrees): 200 ml each month.
To remove stains or scale deposits dose 200 ml as close as possible to the affected area and brush vigorously the scaled areas.

Melpool CA+

Read more

To increase calcium hardness.

144 g of product will increase the calcium hardness of 10 m³ of water by 10 ppm (mg/l), which is equal to 0,7 English degree.
For each treatment, do not dose more than 750 g per 10 m³ of water.

Melpool ICA

Read more

Stabiliser in order to reduce chlorine dissipation because of UV radiation of the sun. Should not be used in combination with stabilised disinfectants or bromine. 

100 g of stabiliser in 10 m³ of water will increase the concentration by 10 mg/l.
Avoid concentrations over 100 mg/l.

Melpool WIC

Read more

Winter care product to condition the pool water during winter, or when the pool is not in use for a long time.
Use biocides safely. Always read the label and product information before use.

If maintenance stops for max. 3 weeks: 80 ml for 10 m³ of water.
During winter: 150 ml for 10 m³ of water. If possible add 50 ml per 10 m³ of water after about 3 months.

Melpool GEL

Read more

Gel to remove dirt and scaling at water line level.

Apply by means of a soft brush; leave for a few minutes. Then scrub and rinse.

Melpool NET

Read more

Liquid multi-purpose cleaner for tiles, foil, etc.

Apply by means of a soft brush; leave for a few minutes. Then scrub and rinse.

Melpool DET

Read more

Cleaning agent for sand filters. 

250 - 750 ml per treatment, depending on the size of the filter.