Liquid flocculant for swimming pools.

Binds floating dirt and dust particles. Prevents cloudy water. Quick and effective flocculation of (dead) algae. Easy to dose. Concentrated flocculant.

Instructions for use:

• Once or twice a week 50 ml or several times a week 10 ml per 10 m³ of water
• In case of very cloudy water, double/triple the dose. Dose a maximum of 100 ml per 10 m³ of water
• Dissolve the product in a bucket of water and distribute evenly over the surface of the water
• Suspended particles will quickly form flakes and settle in the (sand) filter or settle on the bottom of the pool
• During the treatment, the pump must be running for at least 3 to 4 hours. Then rinse the (sand) filter thoroughly
• Sediment can be removed from the bottom with the help of a pool vacuum cleaner or pool robot
• It is not recommended to use the swimming pool during the flocculation process
• pH value should be maintained between 7.2 and 7.6

Note: Do not dose too much! An overdose causes the opposite effect (clouding). Not recommended for use with cartridge/cartridge filters. These can clog or slam shut.

Warning:

• Always read the label and product information before use
• Keep in a cool dark place, out of the reach of children
• Never mix with other (swimming pool) chemicals
• To avoid risk of skin and eye irritation, it is recommended to wear protective gloves and eye protection when handling this product

Tip:
For flocculation of very fine dirt and dust particles or application in conjunction with a cartridge filter look here for an alternative flocculant.